2-wire loop powered transmitter for Axial Position/ Phase Reference

 Does not require proximity probe driver

4-20mA output

 Buffered output/ GAP

 Compatible with other manufacturers’ proximity probes (5mm, 8mm and 11mm)

Powered by DCS/PLC directly

 

Product Detail:

 

The TR4102 is a cost-effective solution for monitoring the axial position or phase reference on balance of plant machines. The TR4102 combines the proximity probe driver and the signal conditioning circuit into one package. It works with a proximity probe and extension cable as a system.

Features

• Loop powered transmitter
• Does not require proximity probe driver
• Buffered output/ GAP
• Compatible with other manufacturers’ proximity probes (5mm, 8mm and 11mm)
• Aluminum cast case (copper free) with epoxy potting for better environmental protection and reliability
• Same size as a proximity probe driver

Specifications

Electrical

DCS or PLC Power Supply:

16-30VDC

Sensor Interface:

Special 95Ω coaxial cable with connector

Probe:

5mm, 8mm, and 11mm probes which includes: TM0180, TM0105, TM0110, 3300, and 7200 series

Sensor Linear Range (reference with AISI 4140 steel):

5mm, 8mm probe: 2.0 mm (80mil)

Approximately 0.25mm (10mil) to 2.25mm (90mil)

11mm probe: 4.0mm (160mil)

Approximately 0.4mm (15mil) to 4.4mm (175mil)

4-20mA Transmissions:

2-wire, load

Phase reference: frequency response: 0 - 10 KHz

(G02 and G03)

Buffered Output (GAP V):

Raw position signal

Nominal: 2-18VDC

Impedance: 20KΩ

Maximum cable distance: 3.0m (10ft)

Sensitivity: 8mV/um (200mV/mil) nominal

Frequency response: 0 - 10 KHz

Maximum Load:

50×(Vs-16)

Where Vs is the system power supply

System Self-test:

System OK: output 4-20mA

System Not OK: output < 3.6mA

Physical

Height: 75mm (2.95”)

Weight: 1.0kg (2.0 lbs)

Environmental

Temperature:

Operation: -40℃ to +70℃

Storage: -40℃ to +100℃

Humidity:

90% non-condensing