3-Wire Transmitter for Radial Shaft Vibration

Does not require proximity probe driver

4-20mA output, source, will transmit signal up to 300 meter(1000ft)

 Buffered output/ GAP

 Compatible with other manufacturers’ proximity probes (5mm, 8mm and 11mm)

Powered Supply:  20-30VDC

 

Product Detail:

 

The TR3101 is a cost-effective solution for monitoring the radial vibration on balance of plant machines. The TR3101 combines the proximity probe driver and the signal conditioning circuit into one package. It works with the proximity probe and extension cable as a system.

 

Features

 

• Does not require proximity probe driver
• Buffered output/GAP will transmit signal up to 300 meters (1,000 feet)
• Compatible with other manufacturers’ proximity probes (5mm, 8mm and 11mm)
• Aluminum cast (copper free) case with epoxy potting for better environmental protection and reliability
• Same size as a proximity probe driver

Specifications

 

Electrical

Power Supply:

20-30VDC

Frequency Response (±3dB):

2.0 - 3,000Hz

Probe and cable:

5 meter or 9 meter proximity probe and extension cable

works with 5mm, 8mm, and 11mm probes

Proximity probe includes: TM0180, TM0105, TM0110, 3300, 7200, 990 series

Sensor Linear Range (reference with ANSI 4140 steel):

5mm, 8mm probe: 2.0 mm (80mil)

Approximately 0.25mm (10mil) to 2.25mm (90mil)

11mm probe: 4.0mm (160mil)

Approximately 0.4mm (15mil) to 4.4mm (175mil)

Overall Vibration:

4-20mA; Source

Buffered Output/ GAP:

Original vibration, un-filtered

Nominal: 2-18VDC

Impedance: 500Ω

Maximum cable distance: 300m (1,000ft)

Sensitivity: 8.0mV/um (200mV/mil) nominal

Maximum Load:

500Ω

Isolation:

> 500Vrms; circuit to case

System OK:

System OK: output 4-20mA

System Not OK: output < 3.0mA

Physical

Height: 75mm (2.95”)

Weight: 0.5 kg (1.0 lb)

Environmental

 

Temperature:

Operation: -40℃ to +70℃

Storage: -40℃to +100℃

Humidity:

90% non-condensing