The TM016 is a solid state loop powered transmitter which provides a 4-20mA output proportional to the machine case vibration level. The 4-20mA output interfaces directly to any PLC or DCS for shutdown, alarm or trending. The TM016 is easy to install on the machine case.

 

Product Detail:

Features

• Loop powered 4-20mA velocity or acceleration (peak or RMS) output
• Wide operating temperature range -40℃ to +120℃ (-40℉ to +248℉)
• Stainless steel housing
• NEMA4X, IP65 or IP67 environmental rating
• Frequency filter options
• Wide selection of mounting studs

 

Electrical

 

Overall vibration output:

4-20mA, load (loop powered)

Accuracy: 5%

Frequency response (±3db):

Acceleration: 2~3,000 Hz

Velocity: 2~3,000 Hz

Transverse sensitivity:

< 5%

Power supply:

12VDC - 30VDC

Maximum load resistance:

At least 500 ohms @ 24VDC power supply

Isolation:

500Vrms, circuit to case

Case material:

316L stainless steel

Output connection:

Flying leads:

2 cables for 4-20mA

2 cables for buffered output

Mil connector:

2 pins for 4-20mA

Buffered output:

100mV/g nominal

Maximum cable length 3m (10ft)

Filter option:

12dB/oct for hi-pass filter

12dB/oct for low-pass filter

Physical

Temperature:

Operation:

Normal (G=0): -40℃ to + 100℃ (-40℉ to +212℉)

High (G=1): -40℃ to + 120℃ (-40℉ to +248℉)

Storage: -50℃ to + 125℃ (-58℉ to +257℉)

Dimensions:  Diameter: 38mm (1.5”)

                    Height: Flying leads: 87mm (3.4”);

 Mil connectors: 87mm (3.4”)

Weight: 420g (0.875lb)

Output Connections: 2-pin MIL-C-5015

Flying leads: 2 or 4 wires （Default lead length is 5m. When working with TM016-11 or TM016-02, the lead length is 20cm）

1 NPT

Environmental:

Flying leads: NEMA 4X, IP65

2-pin connector: IP67